What Does P0B7E Mean?
DTC P0B7E indicates that the hybrid battery voltage sense circuit for cell group "N" is reading below the minimum acceptable voltage threshold. The BMS consistently measures a voltage from group N that falls below what is expected for the current operating conditions. This low-voltage condition can result from physically underperforming cells or from a circuit fault that reduces the signal between the cells and the BMS.
Common Causes
30%
One or more degraded cells in group N with reduced open-circuit voltage
25%
High-resistance connection causing voltage drop between cells and BMS
20%
Short to ground in the cell group N sense wiring harness
15%
Elevated parasitic self-discharge in group N cells
10%
BMS sense channel input fault reducing the measured voltage below actual
Diagnostic Steps
1
Record freeze frame data and note how far cell group N voltage falls below the pack average and threshold.
2
Measure cell group N voltage directly at the battery terminals with a DVOM, then compare to the BMS reported value.
3
If direct measurement confirms low voltage, perform a cell capacity test on group N to identify individual cells with diminished capacity.
4
If the direct measurement reads normal, check the sense circuit for voltage drops across connectors and for ground shorts.
5
Inspect harness routing for damage, particularly near sharp edges, brackets, or heat sources.
6
If weak cells are confirmed, follow manufacturer cell module replacement procedures, observing all high-voltage safety protocols.
Estimated Repair Cost
$200 - $3,500
Parts + labor, varies by vehicle and location
DTC P0B7E indicates that the hybrid battery voltage sense circuit for cell group "N" is reading below the minimum acceptable voltage threshold. The BMS consistently measures a voltage from group N that falls below what is expected for the current operating conditions. This low-voltage condition can ...
The most common cause of P0B7E (Hybrid Battery Voltage Sense "N" Circuit Low) is: One or more degraded cells in group N with reduced open-circuit voltage
Typical repair costs for P0B7E range from $200 to $3,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Low cell group voltage increases the risk of deep discharge, which can permanently damage lithium cells through copper dissolution and internal short formation. The BMS will limit discharge power to protect the group, which may cause unexpected power reductions during driving.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0B7E to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Hybrid/EV Battery System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
