What Does P085E Mean?
The gear shift control module "B" is not performing within its expected operational parameters. Similar to P085D but for the secondary module, this code indicates the module communicates but fails to execute gear shifts accurately or within the expected time window. The shift actuator controlled by this module may be sluggish, inaccurate, or intermittently non-responsive.
Common Causes
35%
Internal failure of gear shift control module "B"
25%
Mechanical binding in the secondary shift mechanism
15%
Low or fluctuating voltage supply to the module
15%
Worn or contaminated shift actuator motor
10%
Software/calibration mismatch in the module
Diagnostic Steps
1
Monitor gear shift module "B" actuator data with the scan tool — compare commanded vs. actual actuator positions to quantify the performance deviation.
2
Verify battery voltage and measure voltage at the module connector — ensure adequate and stable power supply during shift operations.
3
Inspect the secondary shift mechanism for physical obstructions, worn bushings, or excessive play that impedes accurate actuation.
4
Use bidirectional scan tool commands to exercise the shift actuator through its full range — listen and observe for binding, hesitation, or incomplete travel.
5
Check for software updates or recalibration procedures from the manufacturer for the gear shift control module "B".
Estimated Repair Cost
$250 - $1,100
Parts + labor, varies by vehicle and location
The gear shift control module "B" is not performing within its expected operational parameters. Similar to P085D but for the secondary module, this code indicates the module communicates but fails to execute gear shifts accurately or within the expected time window. The shift actuator controlled by ...
The most common cause of P085E (Gear Shift Control Module "B" Performance) is: Internal failure of gear shift control module "B"
Typical repair costs for P085E range from $250 to $1,100, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Gear shifts controlled by module "B" may be delayed, incomplete, or fail entirely. The transmission may default to a limited operating mode. Drive at reduced speeds and avoid demanding driving conditions until the issue is resolved.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P085E to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Transmission / Electronic Shift Control
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
