What Does P064B Mean?
The Power Take-Off (PTO) control module has a malfunction. The ECM has detected that the module managing the PTO unit — used in trucks and commercial vehicles for operating auxiliary equipment like hydraulic pumps or winches — is not functioning correctly. The driver may notice the PTO is inoperative, engages erratically, or the PTO indicator light is malfunctioning.
Common Causes
35%
Failed PTO control module (internal circuit failure)
25%
Wiring damage or corroded connectors to the PTO module (common in commercial vehicle underbody routing)
20%
CAN bus communication fault between ECM and PTO module
15%
Loss of power or ground to the PTO control module
5%
Software calibration mismatch after PTO module replacement or ECM update
Diagnostic Steps
1
Check for accompanying U-codes indicating communication loss with the PTO module. Review freeze frame data for operating conditions when the fault was set.
2
Verify power supply and ground at the PTO module connector. Measure B+ (should be within 0.5V of battery voltage) and ground continuity (less than 0.5 ohms to chassis ground).
3
Inspect the PTO module connector and wiring harness for physical damage, corrosion, or water intrusion. PTO wiring is often routed in harsh underbody environments.
4
Using a scan tool, attempt bidirectional communication with the PTO module. If no communication is possible, check CAN bus voltages at the module connector.
5
If the PTO module was recently replaced or the ECM was reprogrammed, verify the PTO module is properly configured and calibrated for the vehicle's transmission and PTO gear ratio.
Estimated Repair Cost
$200 - $1,500
Parts + labor, varies by vehicle and location
The Power Take-Off (PTO) control module has a malfunction. The ECM has detected that the module managing the PTO unit — used in trucks and commercial vehicles for operating auxiliary equipment like hydraulic pumps or winches — is not functioning correctly. The driver may notice the PTO is inoperativ...
The most common cause of P064B (PTO Control Module) is: Failed PTO control module (internal circuit failure)
Typical repair costs for P064B range from $200 to $1,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Safe to drive the vehicle normally. The PTO auxiliary function will be inoperative. Do not attempt to engage the PTO until the fault is resolved, as unpredictable engagement could be hazardous to operators working with PTO-driven equipment.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P064B to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Power Take-Off (PTO) System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
