What Does P062A Mean?
The PCM has detected that the fuel pump 'A' control circuit is not performing within expected range. The fuel pump is operating but the feedback signal shows the pump speed or pressure is not matching the commanded output. This can cause drivability issues including lean conditions, hesitation, or stalling under load.
Common Causes
35%
Weak or failing fuel pump with degraded performance
25%
Faulty fuel pump driver module not modulating properly
25%
High resistance in fuel pump power or ground circuits
15%
Clogged fuel filter restricting flow
Diagnostic Steps
1
Step 1: Connect a fuel pressure gauge to the test port and monitor pressure at idle and under load — compare to manufacturer specifications (typically 35-65 PSI depending on vehicle).
2
Step 2: Monitor fuel pump duty cycle or commanded speed via live data and compare to actual fuel pressure response — erratic or lagging response confirms performance issue.
3
Step 3: Measure voltage drop on the fuel pump power and ground circuits at the tank connector — should be less than 0.5V on each. High drop indicates wiring resistance.
4
Step 4: If the vehicle uses a fuel pump driver module, check its power supply, ground, and communication with the PCM. Replace if outputs are erratic.
5
Step 5: If fuel pressure is low at all speeds, replace the fuel pump assembly including the strainer.
Estimated Repair Cost
$150 - $900
Parts + labor, varies by vehicle and location
The PCM has detected that the fuel pump 'A' control circuit is not performing within expected range. The fuel pump is operating but the feedback signal shows the pump speed or pressure is not matching the commanded output. This can cause drivability issues including lean conditions, hesitation, or s...
The most common cause of P062A (Fuel Pump "A" Control Circuit Range/Performance) is: Weak or failing fuel pump with degraded performance
Typical repair costs for P062A range from $150 to $900, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Fuel delivery issues may cause stalling under load, particularly during highway merging or hill climbing. Drive cautiously and avoid heavy acceleration until diagnosed.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P062A to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Fuel System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
