OBDHut

OBDHut

C1927

Moderate

VAPS Solenoid Actuator Return Circuit Short To Battery

What Does C1927 Mean?

The steering module has detected a short-to-battery condition in the VAPS solenoid actuator return circuit. A voltage source is feeding the return wire, corrupting the current feedback signal and preventing the module from accurately controlling solenoid operation.

Common Causes

40%

Chafed return wire contacting a power feed in the engine bay harness

VAPS Return Wire
Engine Bay Harness

25%

Internal solenoid fault with return winding shorted to a power terminal

VAPS Solenoid Actuator

25%

Contaminated connector bridging return to power pins

Solenoid Connector
Connector Seals

10%

Module internal current sense circuit fault

Steering Control Module

Diagnostic Steps

1

Step 1: Disconnect the solenoid and check for voltage on the return wire (key on). Voltage present confirms a wiring or connector short.

2

Step 2: Measure resistance from the return wire to B+ and adjacent power wires.

3

Step 3: Inspect the harness for chafing near the steering gear and engine.

4

Step 4: Check the connector for fluid contamination and corroded bridged terminals.

5

Step 5: Repair and verify proper current feedback values with the module.

Estimated Repair Cost

$100 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does C1927 mean?

The steering module has detected a short-to-battery condition in the VAPS solenoid actuator return circuit. A voltage source is feeding the return wire, corrupting the current feedback signal and preventing the module from accurately controlling solenoid operation.

What causes C1927?

The most common cause of C1927 (VAPS Solenoid Actuator Return Circuit Short To Battery) is: Chafed return wire contacting a power feed in the engine bay harness

How much does it cost to fix C1927?

Typical repair costs for C1927 range from $100 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with C1927?

Corrupted return circuit feedback causes the module to lose accurate control of steering assist, potentially resulting in unpredictable steering effort changes while driving.

How do I diagnose C1927?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to C1927 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Chassis

System

Variable Assist Power Steering (VAPS)

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.