OBDHut

OBDHut

C1249

Critical
Professional

ABS Outlet Valve Coil RR Circuit Short To Ground

What Does C1249 Mean?

The ABS control module has detected a short to ground on the right rear ABS outlet valve coil circuit. The valve coil driver circuit has an unintended low-resistance path to vehicle ground, preventing normal valve control. This disables ABS pressure release capability at the right rear wheel position.

Safety Warning

ABS outlet valve is disabled at the right rear wheel. Wheel lockup during hard braking on slippery surfaces is likely at this corner. Repair before continued driving.

Common Causes

35%

Right rear outlet valve coil winding shorted to the grounded valve body inside the hydraulic modulator

ABS Hydraulic Control Unit
Right Rear Outlet Valve Coil

25%

Pinched or chafed internal wiring contacting a ground plane inside the ABS module housing

ABS Module Internal Wiring

25%

Brake fluid or moisture intrusion into the module creating a conductive ground path

ABS Control Module
Hydraulic Modulator Seal

15%

Corroded module-to-modulator connector with grounding through corrosion deposits

Module Connector
Connector Seal Kit

Diagnostic Steps

1

Step 1: Separate the ABS electronic module from the hydraulic modulator. Measure resistance from each right rear outlet valve coil terminal to the modulator body ground. Less than 10K ohms indicates coil-to-ground short.

2

Step 2: On the module side, measure resistance from the corresponding connector pins to module ground. This determines if the short is in the module electronics.

3

Step 3: Inspect the mating surfaces between the module and modulator for brake fluid residue, which indicates seal failure and fluid contamination of electronics.

4

Step 4: Check for corrosion or moisture damage on the module circuit board near the right rear valve driver components.

5

Step 5: Replace the failed component (modulator or module). Perform complete ABS bleed procedure. Clear codes and perform bidirectional valve test to confirm all valves operate.

Estimated Repair Cost

$300 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does C1249 mean?

The ABS control module has detected a short to ground on the right rear ABS outlet valve coil circuit. The valve coil driver circuit has an unintended low-resistance path to vehicle ground, preventing normal valve control. This disables ABS pressure release capability at the right rear wheel positio...

What causes C1249?

The most common cause of C1249 (ABS Outlet Valve Coil RR Circuit Short To Ground) is: Right rear outlet valve coil winding shorted to the grounded valve body inside the hydraulic modulator

How much does it cost to fix C1249?

Typical repair costs for C1249 range from $300 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with C1249?

ABS outlet valve is disabled at the right rear wheel. Wheel lockup during hard braking on slippery surfaces is likely at this corner. Repair before continued driving.

How do I diagnose C1249?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to C1249 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Chassis

System

Anti-lock Brake System (ABS)

Difficulty

Professional

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.