What Does B0075 Mean?
This code indicates that the Body Control Module (BCM) or Restraint Control Module (RCM) has detected a fault in the deployment control circuit for the second row right seat belt pretensioner. The pretensioner is designed to tighten the seat belt during a collision, and this subfault suggests an electrical or mechanical issue preventing proper deployment control. The system has identified an abnormality that could compromise the pretensioner's ability to function correctly during a crash event.
Safety Warning
This is a critical safety system fault that compromises occupant protection in a collision. The second row right seat belt pretensioner may not function during a crash, increasing injury risk for that seating position. Repair should be completed immediately, and occupants should avoid using that seating position until repaired.
Common Causes
35%
Faulty pretensioner pyrotechnic device or internal resistance out of specification
30%
Damaged or corroded wiring harness or connectors between BCM/RCM and pretensioner
20%
High resistance or open circuit in pretensioner deployment loop
15%
Faulty Restraint Control Module or Body Control Module
Diagnostic Steps
1
Step 1: Perform a visual inspection of the second row right seat belt pretensioner connector under the seat or at the B-pillar for corrosion, bent pins, moisture intrusion, or damage. Check for proper connector seating and locking mechanisms.
2
Step 2: Disconnect the battery and wait 5 minutes for system discharge. Using a digital multimeter, measure the resistance across the pretensioner terminals (should typically be 2-5 ohms per manufacturer specifications). Compare readings to factory service manual values.
3
Step 3: Inspect the wiring harness from the pretensioner to the RCM/BCM for chafing, cuts, pinch points, or damage especially at routing points through seat tracks and B-pillar areas. Check for proper wire routing and secure mounting.
4
Step 4: With battery still disconnected, check continuity of each wire in the pretensioner circuit from connector to RCM/BCM. Also check for short circuits to ground or power using a multimeter on ohms setting.
5
Step 5: If wiring and pretensioner resistance are within specification, use a scan tool to monitor live data for pretensioner circuit voltage and compare to other seat positions. Check for stored crash data or deployment history in RCM memory.
6
Step 6: After repairs, reconnect battery, clear codes, and perform a system self-test using the scan tool. Verify the pretensioner warning light operates correctly and no codes return. Document all resistance and voltage readings for quality assurance.
Estimated Repair Cost
$300 - $1,200
Parts + labor, varies by vehicle and location
This code indicates that the Body Control Module (BCM) or Restraint Control Module (RCM) has detected a fault in the deployment control circuit for the second row right seat belt pretensioner. The pretensioner is designed to tighten the seat belt during a collision, and this subfault suggests an ele...
The most common cause of B0075 (Second Row Right Seatbelt Pretensioner Deployment Control (Subfault)) is: Faulty pretensioner pyrotechnic device or internal resistance out of specification
Typical repair costs for B0075 range from $300 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.
This is a critical safety system fault that compromises occupant protection in a collision. The second row right seat belt pretensioner may not function during a crash, increasing injury risk for that seating position. Repair should be completed immediately, and occupants should avoid using that seating position until repaired.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to B0075 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Body
System
Supplemental Restraint System (SRS) / Passive Safety System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
